We support different types of devices, such as scanners by E-Seek and Gemalto (3M).


Drivers for our supported scanners can be found on our website here.


E-Seek

M200, M210, M250, M260

 

Plug scanner into any available USB port


Download driver from our website here.


Run the file CDM21228_Setup.exe


Follow prompts to install the driver


Restart VeriScan


Select the Scanners/Images tab from the top menu.


Use the drop down box on the left to select your device.

(USB Serial Port w/ COM#)



M280

 

Plug scanner into any available USB port


Download BOTH drivers  from our website here.

(Driver Download and Image Driver Download)


Extract the M280v2_Driver.zip file


Run the setup file CDM21228_Setup.exe


Follow prompts to install the driver


Open the Device Manager and look for

Other Devices > M280V2


Right click on M280V2 and select Update Driver


Select "Browse my computer for driver software"


Navigate to the folder where you extracted the 

M280V2_Driver.zip file earlier.


Select your appropriate OS and click Okay


Restart VeriScan


Select the Scanners/Images tab from the top menu.


Use the drop down box on the left to select your device.

(USB Serial Port w/ COM#)






Please note that E-Seek devices as well as magnetic readers with USB cables are considered “Serial Devices”, and thus need to be configured accordingly. You can only use one scanning device at a time. If you are not sure which COM port to select for your reader, simply refer to Device Manager via the Hardware and Sound tab in Control Panel*. Once in Device Manager, use the drop down under Ports (COM & LPT).


*If running Windows 10, Control Panel can be accessed by using the Search feature (Windows Key + S), or by right-clicking the Start button.


E-Seek devices look similar to the following image (note COM5 port):




Gemalto

  1. Plug scanner into any available USB port
  2. Download the appropriate driver from our website here.
  3. Run install file and follow prompts to install the driver
  4. Restart VeriScan
  5. Select the Scanners/Images tab from the top menu 
  6. Click on Page Reader Settings
  7. Select connected scanner serial number from the drop down
  8. Click OK

ID Tech

  1. Download driver from our website here.
  2. Plug in your scanner and allow Windows to install the basic drivers
  3. Unzip your downloaded file (USBCDC_Driver_A.zip) until you are left with the folder 80066803-004_USBCDC_Driver
  4. Open Device Manager on your PC
  5. Click on Ports and right-click USB Serial Device
  6. Update driver
  7. Select Browse my computer for driver software
  8. Point it to your previously unzipped folder, then click OK
  9. Select Next and Windows should install update the scanner with the required drivers
  10. Select the Scanners/Images tab from the top menu and use the drop down box on the left to select your device


Your selected device should now be ready to use within the VeriScan application.


Contact support@idscan.net if you don’t see your scanner setup instructions listed.